Exposure XM HP Headphone Amplifier

Exposure XM HP Headphone Amplifier

1,299.00

The XM HP headphone amplifier is the latest addition to Exposure's XM series of compact half width components. It features two pairs of 6.35mm jacks and two pairs of XLR sockets, allowing two pairs of headphones to be used at the same time. It also includes a built-in DAC with asynchronous USB and support for DSD, as well as a moving magnet phono stage and a preamp output.

Call ‭0161 917 0642, email info@strictlystereo.com or contact us with a question about this product.

Price Match | Free Delivery | Free 30 Day Returns

Finish:
Quantity:
Add To Cart

Product Details

  • Custom-made toroidal power transformer
  • High quality all aluminium casework and extruded front panel
  • High quality resistors & capacitors used in the signal path
  • All discrete audio output stage with high drive capability for low impedance headphones
  • 2 pairs of 6.35mm jacks and 2 pairs of XLR sockets allowing 2 pairs of headphones to be used at one time
  • Moving magnet phono and two line level inputs
  • Two coax (BNC) and two optical inputs and one class 2 USB input with DSD
  • Separate pre-amp output
  • Remote control
  • Three year guarantee
  • Available in black or titanium  

Specification

Analogue Inputs

  • Pre-amplifier Output (input sensitivity / impedance / S/N):
  • AUX/PH input MM : 2.5mV @ 1KHz, 47K ohms S/N > 73dB
  • Frequency Response : +/-0.5dB 50Hz-20KHz. High pass roll off -1.5dB @ 20Hz
  • AUX 2 & AUX 3 input line : 350mV @ 1KHz > 14K ohms output gain x3.75, +11.5dB
  • Total Harmonic Distortion : <0.005% at 1KHz : @ 1.3V RMS output
  • Frequency Response : 20Hz - 20KHz +/- 0.5dB
  • Signal to Noise Ratio ref 1.3V RMS Output : 1KHz >92dB
  • Channel Separation @ 20KHz : >60dB

Digital Inputs

  • SPDIF inputs BNC Coax & Optical : 32 - 192KHz @ 16-24 bits
  • Total Harmonic Distortion : <0.005% at 1KHz @ 1.3V RMS output
  • Signal to Noise Ratio ref 1.3V RMS Output : 1KHz : >98dB
  • USB input : Linear PCM 44K1 - 192KHz @ 16-24 bits DSD x64 (DoP) Asynchronous transfer from host

Headphone Output

  • Output Impedance : < 5 ohms
  • Maximum Level into 33 ohms load : @ 1KHz & 0.01% THD : 7V RMS (1.5W)
  • Total Harmonic Distortion : @ 2V output, 1KHz : <0.003% (120mW)
  • Maximum Level into 330 ohms : @ 1KHz & 0.01% THD : 7.5V RMS (170mW)
  • Total Harmonic Distortion : @ 2V output, 1KHz : <0.003% (12mW)
  • Load Impedance total all outputs : 16 ohms minimum

General Specifications

  • Mains Supply : 110/120V or 220/240V @ 50/60Hz (factory set)
  • Power Consumption : <15W
  • Dimensions (WxHxD) : 218mm x 89mm x 363mm (inc knob)
  • Net Weight (unpacked) : 4kg
  • Gross Weight (packed) : 5kg