Exposure MCX System

Exposure MCX System

11,500.00

Ex demonstration

The MCX is Exposure's flagship range. It comprises a combination CD player and DAC, a preamplifier and dual monoblock power amplifiers. The whole system is connected with balanced interconnects for the best possible noise rejection.

#contact

#links

#share

Add To Cart

Product Details

The components cleverly stack together without the need for a traditional hifi rack. Each component has a pillar at each corner, with feet at the bottom and an indentation at the top.

The components are extremely well put together. The monoblock amps weigh in at 40kg a piece and the cover on the CD player slides back like the roof of a missile silo. Even the remote control looks like it was built for the military. It looks great but it sounds even better. Most of our listening has been with Neat SX7i floor-standers and Neat XLS stand-mount speakers.

This is definitely one of those products that has us rummaging through the record collection, and grinning from ear to ear in the process.

MCX Compact Disc Player

Features

  • 4 separate DAC boards with PCM1704 multi-bit DACs, discrete transistor I-V and analogue filter. Each board has a separate regulated supply for DAC and audio circuits

  • Multiple stages of voltage regulation for critical circuits

  • Very low jitter master clock distribution with multiple voltage regulators and smoothing (CD mode)

  • Re-clocking of critical digital signals to the DAC (CD mode)

  • Large toroidal power transformer with separate windings for mechanism, CD display, DAC and audio outputs

  • Full-function remote control

  • Three year guarantee

  • Available in black only

Specifications

  • Analogue outputs : 4V RMS (XLR balanced), 2V RMS (RCA unbalanced)

  • Frequency response : 20Hz – 20kHz, -0.3dB

  • Distortion : Less than 0.005%, CD source

  • Signal to Noise Ratio : > 110dB, CD source

  • Digital inputs : 1 x AES, XLR, 110 Ohms / 2 x BNC 75 Ohms / 2 x Optical 'Toslink'

  • Digital outputs : 1 x BNC, 0.5V, 75 Ohms, terminated / 1 x RCA, 0.5V, 75 Ohms, terminated / 1 x Optical

  • Communication : External remote control receiver input / RJ45 input 'exlink' / RJ45 output 'exlink'

  • Power supply input : Internally adjustable for 110V–120V or 220V– 240V, 50 -60Hz

  • Power consumption : 35W with power on, 25W on stand-by

  • Size : (W x D x H) 490 x 414 x 104mm

  • Weight : 20kg

MCX Pre-Amplifier

Features

  • Mono printed circuit board (PCB) construction to ensure low cross-talk between channels

  • Available with either MM or MC phono cards fitted

  • All discrete transistor audio circuits

  • Input switching and volume attenuation by high quality reed relays

  • X1 gain setting for easy integration into an audio-visual (AV) system when the input is in AV mode

  • 12V input and output trigger system allows control of, or from, an AV system

  • Three year guarantee

  • Available in black only

Specifications

  • Inputs : Phono MM or MC by plug-in board / (XLR or RCA input sockets) / 5 x line level inputs, 250mV / I x CD input, XLR balanced connector

  • Outputs : 2 x XLR, balanced pre-out / 1 x RCA, pre-out / 1 x RCA, tape output

  • Communication : External remote control receiver input / 12V trigger input / 12V trigger output / RJ45 input 'exlink' / RJ45 output 'exlink'

  • Power supply input : Internally adjustable for 110V–120V or 220V– 240V, 50 -60Hz

  • Power consumption : 35W with power on, 25W on stand-by

  • Size : (W x D x H) 490 x 414 x 104mm

  • Weight : 20kg

MCX Power Amplifier

Features

  • Monoblock design ensures low interaction between channels

  • Very large toroidal power transformer (1400VA) with separate windings for the main supply to the power output stage and the critical, low level input circuit

  • Separate supplies to the input stage and output stage. Input stage is regulated for high PSRR

  • Switchable between balanced and unbalanced input modes

  • Built-in protection against over-current, DC off-set and high temperature

  • 12V input and output trigger system allows control of, or from an audio-visual (AV) system

  • Three year guarantee

  • Available in black only

Specifications

  • Power : 300W into 8 Ohms @ 1kHz / 600W into 4 Ohms @ 1kHz

  • Gain : 24dB, unbalanced mode

  • Inputs (switchable) : 1 x RCA unbalanced / 1 x XLR balanced

  • Outputs : 2 pairs of loudspeaker sockets for bi-wiring

  • Communication : 12V trigger input / 12V trigger output / RJ45 input 'exlink' / RJ45 output 'exlink'

  • Power supply input : Internally adjustable for 110V–120V or 220V– 240V, 50 -60Hz

  • Power consumption : 500W @ full power into 8 Ohm load, <1W on stand-by

  • Size : (W x D x H) 490 x 414 x 238mm

  • Weight : 35kg